Mini Brick (S-RGB)
Mini Brick (S-RGB)
Relive your childhood memories with the Mini Brick. This trusty stubby saber is perfect for your nostalgic adventures.
Couldn't load pickup availability
Collapsible content
Description
Features:
- smoothswing
- gesture controls
- 27 preloaded sound fonts (can be further customized via SD card)
- SD card customization
- connect via Bluetooth with mobile app ForcePark for even more customization options
- RGB colour change
- blade style customization (via SD card and mobile app)
- blaster block
- flash on clash
- lockup
- customizable background music
- rechargeable battery
- Hilt Material:Aircraft grade 6061 aluminum alloy
- Blade Material:Polycarbonate with diffusion film
- Blade:1" outer diameter polycarbonate blade with 2mm wall thickness.
- Battery: Rechargeable 2000mAh 18650 battery
Listing includes:
- 1x hilt with S-RGB V4 electronics core
- 1x polycarbonate blade
- 1x USB-C charging cable or 1x external lithium-ion charger
- 1x 5V1A charging block for USB if applicable
- blade retention hex wrenches
- 1x instruction card
- 1x micro SD card reader
This S-RGB saber is manufactured by TXQ Sabers.
All S-RGB sabers are hand inspected to ensure it has correct and functional electronics.
Unfortunately S-RGB sabers are only eligible to be shipped domestically within Canada or to the USA. If you reside in the rest of the world and still want to purchase, please reach out to stardustsabers@gmail.com and we can see about arranging shipping options.
Dimensions
S-RGB Instructions
You can find instructions below at S-RGB Instructions
Before use, charge the saber fully with the provided cable and charging block. Make sure to not supply more than 5V and 1A output to the saber or charge the saber while it's on. If those numbers mean gibberish then don't worry, that's what the charging block is for!
Charge for about 2 hours for but make sure not to leave it completely unattended.
To insert the blade, use the provided hex key to loosen the emitter blade retention screws. Insert the blade and tighten the screws just enough to hold the blade in place with friction.
Be careful not to over-tighten, as this will dent and damage the blade. Light marks on the blade from the set screw is expected.
Features
S-RGB V4 comes with a large library of sound fonts (27) already on the SD card but you can add even more just by dragging and dropping it on the SD card. There are 3 blade styles and you can easily toggle between them or set colours via the mobile app!
Sound Fonts
Here are the 27 default sound fonts included on the SD card. You may add, edit, or delete sound fonts but make sure you keep a backup of the files on your local hard drive.
| Sound Font Name | Sound Font Artist |
| Ani's Padawan | JuanSith |
| Angry Ani | JuanSith |
| Blue Lady Master | JuanSith |
| Master Depa | JuanSith |
| D-Maul | JayDalorian |
| Dookula | JuanSith |
| Dark Sith Red | Mountain Sabers |
| Emperor | unknown |
| Fallen Order Cal | JuanSith |
| Frolic Frog | JuanSith |
| Graflex IX | JuanSith |
| Grumpy Ben | JuanSith |
| Inquisitor | JuanSith |
| L-Skywalker | JayDalorian |
| Mace Windy | JuanSith |
| Mando Saber | JuanSith |
| Master Mundi | JuanSith |
| Obi Ep III | JuanSith |
| Quin Vos | JuanSith |
| Revanchist - Reborn | JuanSith |
| Revanchist - The Butcher | JuanSith |
| Temple Guard | JuanSith |
| TFU 2 Secret Apprentice | JuanSith |
| The Lost Sister | JuanSith |
| Tulak: The Greatest Swordsman | JuanSith |
| Rogue Vader | JuanSith |
Adding Background Music
Some but not all of the default sound fonts have background tracks already.
If you wish to add tracks to a sound font make sure that they are:
- saved as .wav files
- bitrate of 44100 Hz
- saved without any metadata
Tracks are stored in each individual sound font folder with the following naming format track#.wav or track (#).wav. If you have multiple track files, make sure they are named in numeric sequential order. When playing background music the tracks would be selected at random.
Saber Operation (1 Button)
| Hibernate | |
| Wake up saber | Hold button |
| Standby | |
| Ignite saber | Tap button |
| Twist the saber | |
| Adjust volume | Hold the button for 1s or 1 LED button blink |
| Switch sound fonts |
Hold the button for 2s or 2 LED button blinks |
| With the saber pointed up, hold the button and twist the saber | |
| Switch blade style | Hold the button for 3s or 3 LED button blinks |
| Background music | With the saber pointed down, hold the button and twist the saber |
| Enter hibernate mode | Hold the button for 5s or 5 LED button blinks |
| Idle for 10 minutes |
| Ignited | |
| Blaster block | Tap the button |
| Flash on Clash | Hard clash on the saber |
| Lockup | Hold the button for 1s or 1 LED button blink. Tap the button again to disengage lockup |
| Colour change | Hold the button for 2s or 2 LED button blinks |
| With the saber pointed down, hold the button and twist the saber | |
| Switch blade style | With the saber pointed up, hold the button and twist the saber |
| Retract saber | Hold the button for 4s or 4 LED button blinks |
| Twist the saber |
Saber Operation (2 Buttons)
| Hibernate | |
| Wake up saber | Tap the Main button |
| Standby | |
| Ignite saber | Tap button |
| Twist the saber | |
| Adjust volume | Hold the Main and Aux button at the same time, release after the prompt to enter volume change mode. Click main button to increase the volume and click Aux button to decrease the volume. Press and hold Main and Aux button to exit |
| Switch blade style | Hold the Aux button for 1s |
| Switch sound fonts | Tap the Aux button or With the saber pointed up, hold the Aux button and twist the saber |
| Switch background music | With the saber pointed down, hold the Aux button and twist the saber |
| Enter hibernate mode | Tap the Aux button 3 times or Automatically enters hibernate mode after idling for 10 minutes |
| Ignited | |
| Blaster block | Tap the Aux button |
| Flash on Clash | Hard clash on the saber |
| Lockup | Hold the Main button for 1s. Tap the button again to disengage lockup |
| Colour change | With the saber pointed down, hold the button and twist the saber |
| Retract saber | Tap the Main button |
| Twist the saber | |
| Enable or Disable Flash on Clash | Hold the Main and Aux button at the same time then release |
Saber Customization
SD Card Customization
You can add sound fonts on the SD card with numerically ordered folder names. S-RGB V4 can take Proffie formatted sound fonts.
You can also change blade styles in the "config.ini" file in the "set" directory.
Mobile App
In addition to the SD card, you can more easily customize the saber via Bluetooth using a mobile app. The app "ForcePark" is available on Android through the Google Play Store and iOS on the App Store.
It currently has the below icon:
Note: The iOS version of the app currently has a bug where the MAC address of your saber contains all 0s. A workaround for this is to go into the config file (config.ini) under the "set" directory in the SD card and rename the "DeviceName" parameter. This will allow the MAC address to be detected properly.
More Information
Saber with multiple blade retention screws
What if my saber has multiple blade retention screws? Should I tighten them all in?
Good question, here are some diagrams to illustrate which ones you should tighten. The blade retention screws are marked in blue and the contact points acting on the blade are marked in red.
In the middle diagram with all retention screws tightened, the red areas marked in red are the surface area contact points of the blade. Note how it's only really making contact with the 4 retention screws and the opposite ones are counteracting against each other.
Whereas in the 3rd diagram on the right, where only retention screws on the same side are tightened, the blade has much more surface area contact with the inside wall of the hilt itself.
It's preferred to tighten retention screws on the same side, or 90 degrees from each other so the blade has more surface contact which results in it being held in the saber tighter.
Warranty
All ECO RGB sabers come with a 1-year limited warranty on the electronics. The warranty period begins on the date of delivery.
Warranty only covers normal operation of the saber as instructed. Tampering with the electronics, modifications to the hilt, inserting the battery with the incorrect polarity, and incorrectly charging the saber will void the warranty.
If there are any issues with the saber please reach out to us and we'll do our best to assist.